Lake of the Ozarks Splash Painting LLCA Shade Above The Rest

Home | Site map | About Us | Contact Us | Warranty
Why Use Splash Painting | Warranty | Values | Safety and Security
Faux Painting | Expert Drywall Repair | Color Selection | Description of Paint Sheen or Luster
Selecting a Contractor | Color Selection | Pressure Washing | Description of Paint Sheen or Luster
Exterior Staining | Interior Staining | Decks and Fence Restoration | Concrete Finishes and Garage Floors
Painting Contractors Painting at Lake Ozark

Splash Painting LLC Interior Stain and Lacquer

Interior Stain and Lacquer

Staining and sealing a wood surface can produce a durable finish that accents and enhances the grain of the wood. Splash Painting LLC will use the proper methods to stain and seal raw wood surfaces that will help to preserve its beauty for a long time.


Knowing when it's time to stain is important. Knowing what type of Stain to use is vital. Prepping the work area is critical. Knowledge is power.

Painting Lake of the OzarkFor interior staining we:

  • Fill nail holes and cracks.
  • Sand and prep surfaces.
  • Stain, sanding seal and finish with two coats lacquer for an even sheen.
  • Cover and protect pre-finished areas.
  • Stain with quality Sherwin Williams and Benjamin Moore Stain (or your choice).
  • Final payment after your approval

    Discoloration of wood:

    When the stain fails the wood can take on a gray or faded look.
    If you notice your interior wood turning a gray or faded color ( first to go will be troubled areas like traffic areas on floors, handrails and area that get touched allot) it is time to re-stain and clear.

    Stains are available in a wide variety of wood tones, as well as pastels and solid stains. Your local paint dealer has samples so that you can see how the different stains will look on real wood. For wood with an attractive grain (like oak) a good choice is stain that enhances the grain pattern. For cabinets and trim made of less attractive wood or mismatched pieces of wood; pastels or solid stains are a good choice, because they conceal the grain of the wood.


    Pine and other softwoods have uneven grains and absorb stain unevenly this will create a blotchy un-even appearance. To prepare softwood for staining we suggest applying a coat of wood conditioner. This will help control stain penetration and achieve a more uniform stain job.

    Splash Painting LLC at Lake Ozarks About Us | Site Map | Terms | Contact Us | FAQ ©1999-Current Splash Painting LLC